•	Filtration Media	:	Double Layered Asymmetric Polyethersulfone (PES) Membrane (absolute rated)
•	Media Support	:	Polypropylene
•	End Caps	:	Polypropylene
•	Center Core	:	Polypropylene
•	Outer Support Cage	:	Polypropylene
•	Sealing Method	:	Thermal Bonding
•	O-rings	:	Buna, Viton®, EP, Silicone, FEP Encapsulated Silicone, FEP Encapsulated Viton.
•	TMA	:	0.03µm,0.10µm,0.22µm,0.45µm,0.65µm,0.80µm,1.00µm,1.2µm

Pharmaceutical grade polyethersulfone PPS Filter Cartridges are sterilizing grade cartridges. The polyethersulfone (PES) membrane used in these cartridges is optimized for retention and is double layered for extra security. Polyethersulfone cartridges see broad service in sterile fill applications in SVPs and biological products. Polyethersulfone is particularly suited for the filtration of products whose constituents, such as preservatives and proteins, can adsorb to the media. The low binding characteristics of polyethersulfone make it a good choice for filtration of ophthalmics and valuable protein solutions such as vaccines and other biologicals. PPS Membrane Filter Cartridges are flushed to remove manufacturing debris and reduce extractables and are 100% integrity tested.

• Diagnostics.
• LVPs and SVPs.
• Water for Injection.
• Vaccines.
• Biologicals.
• Ophthalmics.

• Available in various materials of construction including Hastelloy1 AL6XN2 and Titanium.
• Single piece non-rotating PVDF stem with integrated tip seal.
• All bodies are manufactured from BPE compliant bar stock with controlled sulfur (.005-.017%) ferrite<0.5% Fully traceable bodies insure ease of validation/documentation Surface finishes available from 25Ra to 10Ra, mechanical and electropolished 1Hastelloy is a trademark of Haynes International 2AL6XN is a trademark of Allegheny Ludlum.

•	Filtration Media	:	Single Layered Asymmetric Polyethersulfone (PES) Membrane (absolute rated)
•	Media Support	:	Polypropylene
•	End Caps	:	Polypropylene
•	Center Core	:	Polypropylene
•	Outer Support Cage	:	Polypropylene
•	Sealing Method	:	Thermal Bonding
•	O-rings	:	Buna, Viton®, EP, Silicone, FEP Encapsulated Silicone, FEP Encapsulated Viton.
•	TMA	:	0.03µm,0.10µm,0.22µm,0.45µm,0.65µm,0.80µm,1.00µm,1.2µm

Pharmaceutical grade polyethersulfone PSPS Filter Cartridges are sterilizing grade cartridges. The polyethersulfone (PES) membrane used in these cartridges is optimized for retention. Polyethersulfone cartridges see service in sterile fill applications in SVPs and other biopharmaceutical products. Polyethersulfone is particularly suited for the filtration of products whose constituents, such as preservatives and proteins, can adsorb to the media. The low binding characteristics of polyethersulfone make it a good choice for filtration of ophthalmics and valuable protein solutions such as vaccines and other biopharmaceuticals as well as plasma fraction products. PSPS Membrane Filter Cartridges are flushed to remove manufacturing debris and reduce extractables and are 100% integrity tested.

• Diagnostics.
• LVPs and SVPs.
• Water for Injection.
• Vaccines.
• Biologicals.
• Ophthalmics.

• Available in various materials of construction including Hastelloy1 AL6XN2 and Titanium.
• Single piece non-rotating PVDF stem with integrated tip seal.
• All bodies are manufactured from BPE compliant bar stock with controlled sulfur (.005-.017%) ferrite<0.5% Fully traceable bodies insure ease of validation/documentation Surface finishes available from 25Ra to 10Ra, mechanical and electropolished 1Hastelloy is a trademark of Haynes International 2AL6XN is a trademark of Allegheny Ludlum.

•	Filtration Media	:	Polytetrafluoroethylene (PTFE) (absolute rated)
•	Media Support	:	Polypropylene
•	End Caps	:	Polypropylene
•	Center Core	:	Polypropylene
•	Outer Support Cage	:	Polypropylene
•	Sealing Method	:	Thermal Bonding
•	O-rings	:	Buna, Viton®, EP, Silicone, FEP Encapsulated Silicone, FEP Encapsulated Viton.
•	TMA	:	0.10µm,0.22µm,0.45µm,1.00µm,3.00µm,5.00µm

PTM Membrane Filter Cartridges are sterilizing grade filters manufactured with inherently hydrophobic polytetrafluoroethylene (PTFE) membrane. These cartridges are designed for use in the filtration of aggressive solvents and as compressed gas and vent filters. Each cartridge module is individually tested using the water intrusion method before it is released from manufacture. The cartridge surface area, filter core design, pleat configuration, and pleat packing density have been optimized to provide increased cartridge life and lower filtration operating costs. Rugged construction ensures repeatable steaming and testing.

• Diagnostics.
• LVPs and SVPs.
• Water for Injection.
• Vaccines.
• Biologicals.
• Ophthalmics.

• Available in various materials of construction including Hastelloy1 AL6XN2 and Titanium.
• Single piece non-rotating PVDF stem with integrated tip seal.
• All bodies are manufactured from BPE compliant bar stock with controlled sulfur (.005-.017%) ferrite<0.5% Fully traceable bodies insure ease of validation/documentation Surface finishes available from 25Ra to 10Ra, mechanical and electropolished 1Hastelloy is a trademark of Haynes International 2AL6XN is a trademark of Allegheny Ludlum.

•	Filtration Media	:	PTFE Membrane (absolute rated)
•	Media Support	:	Polypropylene
•	End Caps	:	Polypropylene
•	Center Core	:	Polypropylene
•	Outer Support Cage	:	Polypropylene
•	Sealing Method	:	Thermal Bonding
•	O-rings	:	Buna, Viton®, EP, Silicone, FEP Encapsulated Silicone, FEP Encapsulated Viton.
•	TMA	:	0.10µm,0.22µm,0.45µm,1.00µm

PTM/HT Membrane Filter Cartridges are sterilizing grade filters manufactured with inherently hydrophobic polytetrafluoroethylene (PTFE) membrane. These cartridges are designed for use in elevated temperature applications for the filtration of aggressive solvents and as compressed gas and vent filters. Each cartridge module is individually tested using the water intrusion method before it is released from manufacture. The cartridge surface area, filter core design, pleat configuration, and pleat packing density have been optimized to provide increased cartridge life and lower filtration operating costs. Rugged construction ensures repeatable steaming and testing.

• Compressed Air .
• Fermentation Air.
• Solvents.
• Pressurized Gases.
• Tank Ventilation.

• Available in various materials of construction including Hastelloy1 AL6XN2 and Titanium.
• Single piece non-rotating PVDF stem with integrated tip seal.
• All bodies are manufactured from BPE compliant bar stock with controlled sulfur (.005-.017%) ferrite<0.5% Fully traceable bodies insure ease of validation/documentation Surface finishes available from 25Ra to 10Ra, mechanical and electropolished 1Hastelloy is a trademark of Haynes International 2AL6XN is a trademark of Allegheny Ludlum.

•	Filtration Media	:	PTFE Membrane (absolute rated)
•	Media Support	:	High Temperature Polypropylene
•	End Caps	:	High Temperature Polypropylene
•	Center Core	:	High Temperature Polypropylene
•	Outer Support Cage	:	High Temperature Polypropylene
•	Sealing Method	:	Thermal Bonding
•	O-rings	:	Buna, Viton®, EP, Silicone, FEP Encapsulated Silicone, FEP Encapsulated Viton.
•	TMA	:	0.03µm,0.10µm,0.22µm,0.45µm,0.65µm,0.80µm,1.00µm,1.2µm

BTM Filter Cartridges are manufactured with inherently hydrophobic polytetrafluoroethylene (PTFE) membrane. These cartridges are designed for use in the filtration of gases and nonaqueous liquids. Applications include bioburden control in fermentation air, compressed gas filtration and tank vent filtration to protect the integrity of stored liquids. Each cartridge module is individually tested using the water intrusion method before it is released from manufacture. The cartridge surface area, filter core design, pleat configuration, and pleat packing density have been optimized to provide increased cartridge life and lower filtration operating costs. Rugged construction ensures repeatable steaming and testing

• Compressed Air .
• Fermentation Air.
• Solvents.
• Pressurized Gases.
• Tank Ventilation.
• Non-Aqueous Solutions.

• Available in various materials of construction including Hastelloy1 AL6XN2 and Titanium.
• Single piece non-rotating PVDF stem with integrated tip seal.
• All bodies are manufactured from BPE compliant bar stock with controlled sulfur (.005-.017%) ferrite<0.5% Fully traceable bodies insure ease of validation/documentation Surface finishes available from 25Ra to 10Ra, mechanical and electropolished 1Hastelloy is a trademark of Haynes International 2AL6XN is a trademark of Allegheny Ludlum.